Home > Product > Measuring System                 - it doesn't mark and scratch at the Roll of goods - it can cut off without sliding and abrasion by the square. - it can maintain freely without controlling pressure and counter. - it can measure without reference to ruggedness, color, gloss and shape of the materials   surface. It can be used for things whose surface is weak ike paper, film, fabric and rubber. - It can deal with ease and doesn't have much space because Doppler SENSOR is small   and light,           - it can measure cut products returning with Belt conveyor with Real Time. - it can make control signal by marking the amount of procuct's size and distinguishing good   products from bad products and , - Doppler SEONSOR, FRONT, TAIL SENSOR can handle being fixed without reference to   cutting-off place catting length. - It can outprint the sizes of products.     Measurement Type Laser Doppler Type Laser Wave length 780mm, Output about 20mW Beam-Form width 5mm, height 1mm Junction distance 80mm(TypeⅠ) 200mm (Type Ⅱ) Junction depth ±3mm (Type Ⅰ) ±8mm (Type Ⅱ) Temperature 5 ~ 40℃ External form 75(W) X 35(H) X 130(D)mm Weight About 500g Speed Range(*) Laser Doppler Type Length scope 0.1mm ~ 99999.9m Measurement indication Speed : 10 Decimal system five step, Unit : m/min Length : 10 Decimal system six step, Unit : m Measurement degree ±0.01% below Speed output Analogue Output 0~ +10V DC 1~300m/min Full Scale Optional set Length output Pitch Pulse 0.1 ~ 100mm/p 0˚, 90˚ 2phase (Direction it does not identify ) Output voltage +5V Differential output +12V Totempole Control input Reset, Gate, Control I/O, Laser ON/OFF Sensor Power Bulit-in Sensor Cable 5m, 10m(max) From External Sensor Cable until of Power supply 5m, 10m(max) Power Supply and Signal Processor 100m(max) Power AC100V ±10% 50/60Hz External form size 432(W) X 149(H) X 349(D)mm Weight about 8Kg     Application equipment Leveller Shear Line, Tube Mill Line, Forming Line, Corrugator, Paper Cutter, etc.     Objective product Sheet Forest Extruded Products Special Products Stainless, Tin plate, Aluminum, Color Copper plate , steel , bronze , Foil Paper, Board, Film Pipe, C section steel , H section steel, construction materials , etc. Against the special product to consult with separate way.     Mea- surement objective Sheet Forest Extruded Products Length: 3 point, Opposite angle : 3 point, shaft : 2 point (Option) Length: 1 point     Objective product external form spec Sheet Forest Extruded Products Thickness : 10mm within (it is possible over 100mm if machinery that controls sensor's focus distance can be adhered.) Width : Sheet Detect Sensor The place which puts the Space Shortest length : like above If the difference between MAX and MIN is below 10mm (in the case of the sensor fixing way) or over 10mm, it need to control junction distance.     Measurement computing power 150SPM (Line Speed 600m/M until it is possible)     Device limit of resolution & Precision rate Possibility to choose in the range of 0.025~0. Measuring length : +-0.01% within     Spec Environ- ment Lasor Sensor Controller Temperature condition : 0~40˚ Humidity condition : 80% below (without dew condensation) Vibrating condition : 0.5G below Inside shock : 10G Tother : don't reflect strong outside things like mirror and so on. don't smear things such as water or oil on the material Temperature condition : 0~40˚ Humidity condition : 80% below (without dew condensation)